タグ: torque

What items should be tested for PET bottles/caps for beverage products？

Summary of bottle cap test items Sealing performance test Use a capping machine to seal the non-carbonated cap according to the rated torque that meets the requirements, test it with a seal tester, pressurize to 200kPa, keep the pressure under water for 1min, observe whether there is air leakage, then increase the pressure to 350kPa, and keep the pressure for 1min , observe whether the bottle cap is loose and pops up. Use the capping machine to seal the carbonic acid cap according to the rated torque that meets the capping requirements, cut off the anti-theft ring, test with a seal tester, pressurize to 690kPa, keep the pressure under water …

What items should be tested for PET bottles/caps for beverage products？続きを読む "

Medicine Bottle Leak Test | Sealing Performance Test

新製品 | 試験機器, Test Method

Medicine Bottle Leak Test | Sealing Performance Test Medicine Bottle Oral solid medicinal high-density polyethylene bottle is a plastic bottle for oral solid preparation produced by injection blow molding technology with high-density polyethylene (HDPE) as the main raw material. Medicine Bottle Leak Test 1. Torque Test Prepare a number of samples. Put an appropriate amount of glass balls into each bottle, and cover the bottle cap (for a test bottle with a screw cap, use a force measuring wrench to tighten the bottle and cap). 2. Leak Test Place it in a container with an air extraction chamber, and immerse it with water. Vacuumize the chamber to a vacuum degree …

Medicine Bottle Leak Test | Sealing Performance Test 続きを読む "

トルク

テスト方法または価格見積が必要です。

メッセージを残していただければ、できるだけ早く返信いたします。